Instant Heater

instant heater

rinnai instant heater

That time of year again when Instant Water Heater Installation in Singapore becomes an important topic. Winter is quickly approaching, which means many homeowners are rushing to get their houses in order. While some people may think installing an Instant Water Heater is a daunting task, it doesn't have to be. We'll discuss installing an Instant Water Heater in your house step by step. We'll also provide some of the advantages of putting in an Instant Water Heater. So, without further ado, let's get started!

Step-By-Step Guide On How to Install an Instant Water Heater

Choose The Right Instant Water Heater for Your Home.

There are several distinct types of Instant Water Heaters on the market. So, which one is best for your house? The size of your home is the first thing to consider. If you have a small apartment or condo, a small Instant Water Heater will suffice. However, if you have a large home, you will need to get a bigger Instant Water Heater.

The next step is to pick the Instant Water Heater you want. Electric and gas are the two primary types of Instant Water Heaters. An electric Instant Water Heater is required if you have an electric water heater in your house. You can get a gas or electric Instant Water Heater if you have a gas water heater in

instant water heater with rain shower white
Get All the Necessary Materials and Tools

Get All the Necessary Materials and Tools.

Once you've chosen the right Instant Water Heater for your home, it's time to gather all the necessary materials and tools. For this project, you will need:

  • Instant Water Heater
  • Screws
  • Wrench
  • Drill
  • Measuring tape
  • Level

Turn Off the Power

To install your water heater, you will need to turn off the power. This is important for safety reasons, as you don't want to get electrocuted. You can do it by locating the breaker box in your home and flipping the switch corresponding to your water heater. When the power is off, you can proceed to the next.

turn off power
Remove The Old Water Heater.

Remove The Old Water Heater.

Now it's time to remove your old water heater. Start by disconnecting the water supply lines from the tank. Next, disconnect the gas line (if you have a gas water heater). Once all the lines are disconnected, you can now remove the old water heater from its location.

Install the new Instant Water Heater

Now it's time to install your new Instant Water Heater. Start by attaching the water supply lines to the tank. Next, connect the gas line (if you have a gas Instant Water Heater). Once all the lines are connected, you can place the Instant Water Heater in its desired location.

instant heater
storage heater Initial Cold Outflow

Turn On the Power and Test Your New Instant Water Heater.

Once your Instant Water Heater is installed, it's time to turn on the power and test it out. Locate the breaker box in your residence and switch off the appropriate switch for your Instant Water Heater. Once the power is on, turn on a hot water faucet in your home and let the water run for a few minutes. If all is well, you should have hot water coming out of the faucet.

Benefits of Instant Heater

Pros of Instant Heater

  • Low cost
  • Easy to install

Cons of Instant Heater

  • The water was not warm enough
  • Low water pressure

Homeowners nowadays desire to add a rain shower set to their bathrooms. Bathing is a pleasure when the intense water pressure strikes our body. Because rain showers consume a lot of water, most instant heaters will not be able to supply enough heat to warm up the water quickly. This becomes an issue for homeowners who want to install a rain shower set in their bathroom.

electric water heater
Digital Instant Heater

Instant Water Heater Common Problem

Water Not Warm

There are three typical reasons for this water not being warm.

The Water Pressure Is Too Intense.

When the heating coil cannot heat the water because the pressure of water is greater than the length of time required for the heating coil to heat the water, in such cases, we recommend reducing water pressure to allow enough time for the coil to warm up the water.

Faulty Electrical Wiring

If your electrical wiring fails, your instant water heater will not receive the electricity it needs to operate, resulting in the heater's inability to heat water. We'll advise you on how to replace the faulty areas' wiring.


Faulty Electrical Wiring
Broken Heating Coil

Broken Heating Coil

This is a typical scenario in which usage causes wear and tear on any electrical device over time. In such cases, we will advise replacing the entire unit as a new one comes with a 12-month manufacturer's guarantee.

Water heater no power

Faulty Switch

When a switch is broken, even when the switch is turned on, you will not receive adequate power to operate the instant water heater. We'll propose replacing the faulty switch in this situation.

Faulty Switch
Faulty Electrical Wiring

Faulty Electrical Wiring

If your electric wiring fails, the power necessary to run your quick heater isn't reaching your existing instant water heater, resulting in a lack of warmth when attempting to use it. We'll advise you on repairing the damaged areas' electrical wiring.

Water Heater Leaking Water

Broken Pipe Seal

Water will begin to seep when the seals between the inlet pipe and outlet pipe are damaged. In such situations, we would recommend replacing the damaged seals to ensure that no more water leaks out.

electric water heater dangers Abnormally Heated Water
water heater repair services Singapore

About My24HrsPlumbing Service

We provide vast plumbing services in Singapore, including plumbing repair, water pipe leak repair, toilet bowl choke, drain choke, clearing clogged sink, water heater installation, toilet bowl installation and repair, and kitchen sink installation and repair. We have a team of certified plumbers prepared for any emergency plumbing needs.

Steps to how we work

1.

Analize need and pricing.

Because each work environment and the severity of the plumbing problem are actually different,

Most of the water work requires on-site assessment to provide an accurate repair plan and cost...

2.

Materials and realization.

Once the assessment is complete and the homeowner agrees with our plumber's proposal and offer,

Immediately we will start preparing the necessary plumbing materials and tools, hen start work and get the job done.

3.

Cleaning and finish

Whether it's repairing a leaks water pipe or unblocking a blockage, when the work is completed, it is inevitable that the floor will be dirty due to the overflow of sewage,

Don't worry, our well-trained plumber will take care of cleaning up the grime for you, after that, that’s be considered job done.

Ready?

Smart Ways to Solve Your Plumbing Troubles

>
Call Now Button